Repair iPhone 11 Pro Max Stuck Apple Logo
Howdy to our beloved readers. I am going to share a story regarding iPhone 11 Pro Max that is stuck at Apple logo. Furthermore, the source of the problem can be anything. We are located in Ampang for more than two years serving customers. Additionally, we provide solution for your problems with original and OEM replacement parts. We require minimum 15 minutes to replace any components and up to 2 days for motherboard issues. Nonetheless, we will always try to give our best service at affordable prices.
Ms. Yong| iPhone 11 Pro Max user | iPhone is stuck at Apple logo
Ms. Yong came to our shop with her iPhone 11 Pro Max that is stuck at Apple logo. The device is unable to proceed to the home screen. Furthermore, the source of the problem can be anything and needs to be inspected. iPhone is a very sensitive device and any hardware problem can cause this problem. It is very tricky to find the problem on the motherboard if it is related. Nonetheless, we will use all of our knowledge and experience to fix any problem with your device. Additionally, our technician will do a thorough inspection to fix your problems. We have experience more than 3 years in this industry and we will improve our service every day. Nevertheless, you can always chat with us through social media to get latest information.
Let’s get into fixing the device and making this problem go away.
Firstly, we had inspected the device’s hardware components. To do this, we dissembled the device and inspected every component thoroughly. All of the hardware was working fine until we found out the source of the problem. Actually, there was some corrosion detected on the proximity sensor. The corrosion was rendering the proximity useless because the device is unable to detect it. We had no other choice but to replace the proximity sensor. Moreover, we told her the problem and the cost to fix the problem to Ms. Wong. She agreed to it and just wanted to get her device fixed. Then, we replaced the proximity sensor and tested the device. The device was working fine and we reassembled the device. Finally, we inspected the device for the last time and returned it to her. In short, we were able to pin point and fix the problem within one hour.